Electronic main power switch

The Armtech Hybrid Battery Isolator is an electromechanical replacement for the standard main switch and provides a complete method of isolating the battery and protecting the alternator in one box without external resistances or messy wiring.
The hybrid battery isolator consists of a robust control box that is normally mounted close to the vehicle's battery.
Three remote switches (all included) operate the unit; two cockpit mounted (one 'ON' and one 'OFF') buttons are operated by the driver, and an external waterproof 'OFF' switch can be operated by the marshals in the event of an accident.
Any number of additional switches can be added if required.
An indicator light on the unit illuminates when the unit is turned on, as does another light attached to the operator-operated 'ON' switch.
The switches are connected to the device with a low voltage and power cable (not supplied). In the event of an accident where one of the cables is cut, the device will automatically shut down.
A sheet of safety stickers and full instructions are also included.

Black Box Dimensions 109x69x54mm
Overall dimensions 156x69x62mm
Weight (approx.) 700 g
Temperature range - 25 ° C to + 85 ° C
Operating voltage 9 - 16V
Max. Switching current 1000A
Continuous current 250A
Max. Alternator current 250A
Power consumption 12W
Alternator protection circuit built into the unit.
12 volt negative ground only.
FIA compliant
This device is not intended for road use.