Digital Meter & Switch Kit for Fan & EWP Pump

Description

DIGITAL METER FAN & EWP ^® SWITCH KIT (Part #0500)

A bright, attractive, compact, highly visible 52mm round gauge with digital LED display for mounting in the driver's compartment!

Automatically activates single or dual fans or a fan and electric water pump at your set/target temperature when additional cooling is required. It can also detect the temperature of the transmission fluid.

It detects the air temperature as it passes through the radiator with the sensor in the radiator fin section or alternatively the sensor can also be placed directly in the cooling system in combination with a temperature sensor adapter kit (part 0409).

The kit is sold in 12 Volt configuration.

*For 24 Volt application:  2 x 24V relays required, sold separately (part no. 10534 )

Sensor wire length: 380 cm

KIT CONTENT
DESCRIPTION	UNITS
Digital Thermal Fan Switch – 52mm Gauge	1
Digital Meter Stand	1
Wiring harness with temperature probe	1
Wiring harness fan	2
Fuse 15 AMP	2
Fuse 30 AMP	2
Red wire attachment	2
Blue wire attachment	2
Relay – 12V 40Amp 5 Pin	2
Blue 6mm Ring Clamp	2
Red 6mm Ring Clamp	3
Self tapping screw 8X3/8	3
Temperature probe mounting kit	1
Installation instructions	1

 

AIR TEMPERATURE APPLICATION:

The kit is set up for use of the air temperature sensor. For water/coolant applications, read below.

It senses the air temperature as it passes through the radiator and has an adjustable temperature range from 5ºC to 110ºC (41ºF to 230ºF).
The temperature sensor is placed in the radiator fin area as close as possible to the hot coolant inlet, no need to cut hoses or can be placed directly in the coolant system.

WATER / COOLANT APPLICATION
Sensor part #0500 can also be placed directly in the cooling system.

• Use case #0465 for OE style 1/4" NPT port installation
• Use case #0409 for installing the radiator hose

De DIGITAL METER THERMATIC® FAN/EWP® SWITCH must be mounted in the driver's compartment of the vehicle for easy reading and quick adjustment.

• Convenient push-button control allows you to precisely set/target the temperature for automatic activation of the Thermatic® Fan #1 and Fan #2 at independent temperatures when additional cooling is required.
• Simple, do-it-yourself installation instructions.
• This flexible switch can also be used to activate an electric water pump and/or an electric booster pump.

This new DIGITAL GAUGE THERMATIC® FAN/EWP® SWITCH an addition to the highly successful #0400 Combo, #0401, #0404 and #0444 Thermatic® Switches

CHARACTERISTICS

• Temperature sensor display range 0 ^o C~130 ^o C(32F~266F)
• Temperature sensor setting range 5 ^o C~110 ^o C(41F~230F)
• Temperature units interchangeable between ^o VS & ^o F
• 12V and *24V compatible
• *For 24 Volt application:  2 x 24V relays required, sold separately (part no. 10534 )
• Can detect standard ambient temperature (air)
• Can detect coolant temperature
  • Use #0465 for OE Style 1/4" NPT Port Installation
  • Use #0409 to install the radiator hose
• Can detect transmission fluid temperature;
  • Use #0465 and required (purchased externally)
    • 1 x Female Fitting Pipe Tee 1/4′ NPT
    • 2 x 3/8′ barb fitting to 1/4′ NPT
• Independent set temperature for Fan 1 and Fan 2
• Independent control of A/C override (fan 1, fan 2 or both)
  • Can be used as manual override
• Can turn off fans manually (press and hold Fan + A/C)
  • For river crossing as an example
• LED indicators for Fan1, Fan2, and A/C
  • LED lights show operating status
  • See the table below
• Over temperature warning with audible alarm
  • See the function table below
• Audible alarm has a 5-minute snooze function.
• Universal design with a thickness of 52 mm.
• Built-in display dimmer with headlight trigger
• Extra long temperature sensor wires 380 cm
• Interchangeable/Replicable Sensor