Description
SPECIFICATION
- Max voltage : 12 to 27V (For 24V relays must be replaced, not included in kit)
- max. amperage : rated up to 30 amps per fan (maximum 40 amps per fan) Unit is supplied with 2 x 30 amp fuses and 2 x 40 amp relays
- Relay Configuration: Double relay
- Length sensor wire: total 142 cm (wire from switch 112 cm plus sensor connector 30 cm)
- Speed: single speed, 10 seconds delay to start the second fan
- Applications: Suitable for single and dual fan applications
- Screen display: LED digital temperature display, actual temperature + set temperature
- Temperature display: Celsius or Fahrenheit
- Temperature Settings: 40°c to 110°c (104°F to 230°F)
- Temp setting: push button
- Circuit type: Pre-programmed microcontroller
- Output wires: Batt + Batt – IGN, AC Coupler, Fan #1, Fan #2 Thermistor Probe
- Dimensions: 95x65x56 mm
- 24 volt application : kit is sold in 12 volt configuration, for 24 volt application you need to buy 2 x 24 volt relay
Kit contents :
- Digital fan switch (IP66 standard)
- Thermal sensor probe 5mm
- Mounting Kit for Thermal Sensor Probe
- Red 6mm Ring Clamp
- Blue 6mm Ring Clamp
- Blue wire
- Self tapping screw
- Instructions
IP66 rated (housing material):
- Protected against total dust ingress
- Protected against high pressure water jets from any direction, limited ingress protection
- Not waterproof
Optional parts :
1/4 Thermal sensor adapter kit for EWP0444 or EWP0500
Allows you to change the sensor type and mounting options of the 5mm slide probe sensor supplied as standard in this kit.
- Length from connector to connector: 37cm
- Cable length: 30cm
Reviews
There are no reviews yet.