Professional Pro Control meters 52 mm with alarm display
The illumination of these meters can be set to '”full on” or “' dimmable” '(dimmable). The supplied factory setting is “'Full on”.
Full on:
In this mode, the white lighting wire is ignored. The gauge dial lighting is always on at full brightness. (unless you select NO color when setting the Backlight Color). If using Full On mode, white wire hook-up is not needed.
Dimmable:
In this mode, the white wire is used to set the intensity of the dial lighting from full brightness down to off.
To change the lighting mode:
With power off, press and hold the peaK button. Apply power to the gauge. Release the peaK button and the dial face will illuminate with either white lighting or blue lighting. Press and release the PEAK button to toggle between Full On (dial is illuminated white) and Dimmable (dial is illuminated blue). Once you have selected the desired mode, don't press any buttons for about three seconds. The dial will flicker white several times to indicate the desired setting has been saved and the gauge will return to normal operation with your new mode selection. Mode selections are saved when power is off.
-
ST3501 / 02
Oil pressure gauge Pro Control incl. Sensor and wiring
€314,50 -
ST3503 / 04 ST3505 / 06
Fuel pressure gauge Pro control incl. Sensor and wiring
€314,50 -
ST3507 / 08
Water temp meter incl. Sensor
€256,00 -
ST3509 / 10
Oil temperature meter Pro Control incl. Sensor and wiring
€260,50 -
ST3511 / 12
Turbo pressure gauge Pro control incl. Sensor and wiring
€314,50 -
ST3513 / 14
Exhaust gas temperature meter Pro Control with sensor and wiring
€297,00 -
ST3515
Gasoline level gauge programmable 0-2800Ohm Pro Control
€227,50 -
ST3516
Voltmeter 8-18 V Pro control
€238,00 -
ST265294
Replace pressure gauge wiring for ST35xx
€45,00 -
ST265295
Replace wiring for temperature gauges for ST35xx
€45,00 -
ST265296
Replace wiring for turbo pressure gauges ST35xx
€45,00 -
ST265299
Replace wiring + probe for ST3513 / 14 EGT meters
€96,50